QWK Range is the Answer to Worldwide Requirements
In an ever-growing FTTH market world-wide, FTTx products are required in some countries that require no fibre splicing; they must provide a future pathway to each home for future upgrade and maintenance. No product on the market does this quite like Emtelle QWKconnect- giving an instantaneous and innovative connection.
It’s called QWK for a reason…
Our QWK range isn’t called QWK for no reason – it really is quick (hence the abbreviation QWK). Through methods pioneered by Emtelle, by using the products within the range, it takes only a few minutes to apply the connector body and plugging it into the customer, means that a FTTH customer can be connected with fibre in less than 10 minutes in a 500m route.
A QWK overview to the QWK Range
Within the QWK range, we also have QWKlink & QWKdrop
Emtelle QWKlink range of fibre is supplied with an LC Ferrule which can be blown into microducts with a minimum inner diameter of 3.5mm. The LC/APC Connector can be field assembled after installation. The opposite end (house connection) is terminated with an SC-APC pigtail.
Emtelle have also launched QWKdrop, in which QWKlink, the pre-connected fibre, can be installed into drop microducts. These microducts can be universal, meaning that they can be installed underground (in ducts or direct burial), overhead, or even along walls, meaning that one drop duct can work with all scenarios, making product choice and stocking of the product very simple.
Product Description
QWKlink products can also be pre-installed into the qwkdrop microducts at the manufacturing stage. This means that the pre-connectorised fibre is supplied within the single duct making it much easier to install the microduct into the customer property. Any excess microduct is removed, spare fibre is coiled in the customer termination box and the fibre is plugged into the SC-APC adapter (this whole process requires no blowing or splicing). This Emtelle solution is called QWKconnect.
QWKconnect can have the fibre connectorised at both ends, so the Microducts can be installed between the cabinet/POP/Splice Enclosure, and the homes with the QWKlink fibre already installed, thus eliminating blowing costs for the operator.
As the QWKconnect fibre bundle is only 1.1mm in diameter, any excess fibre can easily be coiled into the CCP at the home or in fibre management trays at the cabinet/POP/Splice Enclosure.
As an example – for an 80m run between a cabinet and a home, a 100m length of QWKconnect can be installed (with 20m of microduct spare, incase of any measurement inaccuracies) and once the microduct has been installed, any excess microduct can be ‘ring cut’ at the LC end of the QWKconnect fibre, and guided over the LC connector, then discarded, with the excess fibre stored.
Why use ![Plug and play from Emtelle]()
- A duct that can be installed underground (direct buried and ducted), along walls or even overhead
- Fibre pre-installed can be connectorised at one end or both ends
- SC and LC APC connector options available
- No blowing or fibre splicing required for the customer drop
- Extremely small storage area for excess fibre
- Reduced skill set and training required for the install
- Massively reduced capex for installation equipment
- Cost (and space) effective compared to similar products in the market
Cost Savings
Emtelle QWKconnect, is a connectorised drop cable for FTTH that offers product and installation cost savings of over €160 per home and a reduction in installation equipment of €12,000 per 2 man team. QWKconnect also gives a futureproof, dedicated pathway to each home for many years to come. No product on the market offers a solution like this with such savings for a directly buried or ducted FTTH drop solution in a time when quality needs to be high and installation needs to be simple and reliable. QWKconnect is ideal for all fibre operators in their next FTTH roll out.
Watch our Business Development Manager, Colin Kirkpatrick, presenting the new product, QWKconnect to the market here
For more information on QWKconnect, ask our Emtelle Experts here
The post Introducing QWKconnect from Emtelle appeared first on Emtelle.